Not with our sealed-air PVC model. Its heat-sealed seams allow you to disconnect the pump after inflation. When correctly inflated and maintained, it can retain its shape for extended periods. Avoid sharp objects and prolonged direct sun. Important: the Oxford Lite configuration may use a continuous blower, so check the model you are purchasing.

Our sealed-air enclosures undergo airtightness checks before shipping. They are designed to hold air during normal use, though changes in temperature and pressure can require occasional top-ups. If a valve becomes loose, it may be possible to tighten it using the appropriate tool instead of replacing the enclosure.

The specified PVC configuration combines 0.6 mm PVC-coated fabric with Oxford fabric for durable, rain-resistant construction. The impact screen uses double-layer heavy-duty hitting fabric designed for golf-ball impacts. Materials differ by model; confirm the exact specifications on the product page.

The enclosure is designed for a service life of 3 years or more with normal care. Actual longevity depends on weather, storage, frequency of use and maintenance. Protect it from sharp surfaces and extended UV exposure, dry it before packing, and check seams and fabric regularly.

The extended surrounding air columns and double-layer heavy-duty impact fabric are designed to help absorb impact and reduce bounce-back. Rebound cannot be eliminated completely. Use a screen rated for your ball speeds, leave the recommended impact clearance, and keep spectators outside the hitting zone.

A complete mobile simulator setup typically includes a projector, launch monitor, hitting mat, simulator software, golf clubs and balls. You can source the equipment individually or contact Golfort about a complete kit. Confirm compatibility and space requirements before buying.

For many setups, we suggest a projector rated around 4,000 ANSI lumens or higher. For brighter indoor venues or partially shaded outdoor areas, consider 5,000+ ANSI lumens. Check throw ratio, mounting distance, screen size and ambient light too; lumen ratings alone do not guarantee image quality.

The specified enclosure configuration provides a top mounting point for a compatible projector bracket. Before installation, confirm the mounting hardware, projector weight limit and throw distance with our team. Secure all cables so they cannot enter the swing path.

Bright daylight reduces projected-image contrast. We recommend a shaded or covered area, or additional shade flaps where supported. For daytime outdoor use, a projector rated 5,000+ ANSI lumens may help, but direct sunlight can still wash out the image.

A launch monitor measures or estimates shot information such as ball speed, launch angle, spin and carry distance. It is the core tracking device in the simulator and plays a major role in how realistic the ball-flight feedback feels.

Options to consider include SkyTrak, FlightScope Mevo+ and Garmin Approach R10. Golfort does not require a particular brand. We can help you compare models based on your budget, available room depth, tracking needs and software preferences.

Yes, but performance depends on the specific device, correct placement and available ball-flight distance. Some radar-based models can benefit from metallic ball stickers or Titleist RCT balls for indoor spin measurements, subject to the manufacturer's guidance. Camera-based devices such as SkyTrak often work well where space is limited.

Yes, we strongly recommend one. A proper hitting mat provides a more realistic turf feel and helps reduce shock compared with striking off a hard floor. It also gives you a stable stance and a consistent hitting surface.

Choose a professional-grade mat with sufficient thickness, stable backing and good impact absorption. A resilient or layered construction can make repeated swings more comfortable. Prioritize how the mat performs over a turf-like appearance alone.

We recommend at least 1.5 × 1.5 m (approximately 5 × 5 ft) for a comfortable stance and swing. A larger mat can offer more flexibility for left- and right-handed players if your space permits.

The reference Pro configuration measures 4 m deep × 3 m wide × 3 m high (approximately 13.1 × 9.8 × 9.8 ft). Golfort offers additional sizes; please check the dimensions of the exact model you select.

For the 4 × 3 × 3 m enclosure, start with a flat area of around 4.5 × 3.5 m and a ceiling high enough for the full enclosure and safe overhead clearance. A nominal 3 m ceiling leaves no extra room above a 3 m unit. Check your own club-swing path and the launch monitor's required depth before ordering.

It is designed as one spacious hitting bay for one active player at a time. Other people should wait outside the striking area and safely behind the golfer, rather than standing beside the screen during a shot.

Inflation of the specified model takes about 5 minutes under suitable conditions. Allow roughly 10–15 minutes for complete setup, including positioning, anchoring and getting the screen ready. One person can handle much of the process, although extra help makes positioning easier.

The quoted package weight for this configuration is approximately 50.5 kg (111 lb), including the box. We recommend two people for lifting or transporting it safely. Weights vary with size and included accessories.

The enclosure has rain-resistant materials and can tolerate light rain or passing showers when correctly secured. Stop play during heavy rain, thunderstorms or strong wind. Keep projectors, monitors and other electrical equipment protected from moisture.

Use the provided straps and anchoring accessories on a suitable surface, following the setup guidance. Do not assume anchoring makes the enclosure safe in severe weather. If winds become strong or gusty, stop using the enclosure and take it down.

A shaded or covered location is recommended. Extended direct sun exposure can accelerate aging of PVC materials and reduce long-term service life. Shade also improves projected-screen visibility.

Yes. We offer custom printing on up to three sides, including your logo, brand colors and selected graphics. Contact us with your artwork, quantity and placement requirements for a quotation.

Yes. Black is the standard color, and other colors can be discussed for custom production. Available materials, minimum order quantities and lead times depend on the design.

Each unit includes a repair patch kit for certain small punctures or surface wear. Stop using the unit until the repair is complete and tested. For a possible manufacturing defect, contact our support team with photos and your order details.

We offer a 1-year warranty for manufacturing defects. Damage caused by misuse, improper installation, accidental punctures or severe weather is generally excluded. Contact our team for the applicable warranty conditions for your order.

Retail pricing varies by model; you can see current prices in our Golf Simulators collection. We also offer wholesale and OEM quotations, with pricing based on size, quantity and customization.

Yes, Golfort ships to major international markets, including the United States, Europe and Australia, subject to delivery availability. Costs, transit times and import duties vary by destination and order size. Ask us for details before placing a bulk order.

Yes. In addition to the reference 4 × 3 × 3 m configuration, custom dimensions may be available. Share your intended location, ceiling height, required width and depth, and our team can assess the options.

Golfort operates as an integrated manufacturer and trading business with its own production facility. We support both OEM (your branding and specifications) and ODM (collaborative product development) projects.

Absolutely. We welcome long-term wholesale relationships, recurring bulk orders and custom development. As order volume grows, we can discuss improved commercial terms. Learn more about partnering with Golfort.